FDC & Associates Community Forum

Linking our Engineers and Architects to Our Clients for exceptional customer service! Call us today at (909) 881-6542
 
HomeHome  PortalPortal  CalendarCalendar  FAQFAQ  SearchSearch  MemberlistMemberlist  UsergroupsUsergroups  RegisterRegister  Log in  FDC Corporation Link  

Share | 
 

 Steps to building a home (from Kelownabc) Part 1

View previous topic View next topic Go down 
AuthorMessage
Admin
Admin


Posts : 7
Join date : 2008-07-17

PostSubject: Steps to building a home (from Kelownabc) Part 1   Mon Jul 21, 2008 1:31 am

These are some excellent Steps in Preparing yourself for building your home from the beginning to end.

GETTING STARTED
1. Financing: Before you start anything you might want to talk to your bank or a mortgage company to make sure your are able to get the money needed to complete the house.

* Don't forget to budget for the driveway, sidewalks, landscaping, fencing, blinds and maybe even some new furniture or appliances.

2. Plans: You could either find a suitable building lot and then a plan to suit the lot, or if money is not a problem and you have your heart set on a specific plan, first get your plans and then a lot to suit the plan.

* Before you choose a plan, take into account your lifestyle and your budget. It is very easy to go over budget or choose a plan that looks ideal on paper, but does not suit your family.
* There are many design books on the market or you could hire an architect or a home designer to design a house for you.
* Make sure you have enough copies of your plan, 10 would be really nice. Your building permit will take 2 or 3 copies and you will probably have to leave a plan at your place of lending. That leaves you with 6 or 7 copies left. Many of the sub trades need a plan to price out their work, make sure you remember who has a plan and get it back when they are finished with it.
* Most subdivisions will require a set of plans.

3. Subdivision: The developers often control many aspects of what goes into their subdivision. You must decide if their building scheme is within your budget and lifestyle. Most subdivisions will have to approve of your building plan before you may apply for a building permit.

* A building scheme is when the subdivision owners or the city have placed restrictions on the type, color, roof style, size, basically it could include anything to do with the house or the lot. Some subdivisions have many restrictions and others have none.

4. Lot: Put an offer on the lot, subject to financing and in certain subdivisions subject to the building scheme.

5. Estimates: Get cost estimates from all the sub trades needed to complete the job.

* Make sure that you get several quotes from each sub trade, at least 3 or more, stick to REPUTABLE companies and you will be able to ELIMINATE a lot of problems afterwards. Compare all the quotes to make sure they include the same materials and work, and of course the quality of the material. Cheaper is not always better. Have the material list checked by someone who knows a little about it. Do not be afraid to ask questions.

6. Financing: Arrange suitable financing.

7. Building permit: After your plan has been approved by the developer of the subdivision take your plans and a Plot Plan to City Hall for the building permit.

* A Plot Plan is a drawing of how and where your house will be placed on the lot.
* Depending on the time of year and how busy they are it could take from 2 to 6 weeks before the permit is ready to be picked up.
* When you receive your building permit, you will receive a list of conditions that must be met. Example: some beams must be engineered or the soil must be tested.

8. Getting Organized: While you are waiting for the permit you have time to get organized and start arranging for:

* If you are your own General Contractor the first trades to contact are the Surveyors, Framing crew and Excavator.
* Contact the electric company to get temporary power and if this takes to long, there is usually a friendly neighbor who will let you use their power for a small fee.
* You should contact all the trades you have selected to confirm their availability, when confirming ask each trade during what stage of construction they need to come in to do their job.

[b]Step 2: Foundation[/b]

Footings & Foundations
If you haven't already done so you must soon choose the type of doors, windows, garage doors, siding or stucco, trim, brick, furnace, fireplace, cabinets, bathtub & shower.

9. Engineering: In certain conditions an engineer may be required, City Hall, your General Contractor or yourself may feel there is something about the house or lot which requires a stamp of approval from an engineer.

* When building on a slope you may want an engineer to determine what it takes to keep your house in place. For example, foundation walls may require additional steel, or you may have to use a stronger type of concrete. Using an Engineer might seem a bit costly at times, but it will keep everything in the proper conditions and you may just end up with one of the happier houses in the neighborhood.
* Any basement that has (backfilled) foundation walls higher then 7'-8' needs engineering.

# You may want to dig to the service hook ups at this time. Ask the Plumber and Electrician about this.
# The plumber will do the Storm, Sanitary Sewer and Water Connections. These will have to be inspected by a City Inspector, and the Water Company will want to see the water connection.
# The electrician will lay pipes for Cable, BC Tel, and any electrical connections. The wires and cables will be pulled through by the respective Utilities at a later time.
# The connection can be dug at a later time if necessary.
10. Excavating: When the framer or the surveyor has marked where the house will be situated on the lot the excavator comes in and digs the hole for the foundation.

* Optional: Surveying Although it may cost a bit more, in a tight situation you may want a surveyor to mark the corners of the house. Most areas require a survey to be done after the foundation is in. If you get them to come before you start with the footings it will cost only a little more but it could possibly save you a lot of money and frustration. Many a foundation has had to be moved or entirely redone because it was in the wrong spot.

excavating
11. Sand & Gravel: Depending on the excavated soil, you will need good sand, pitrun and drain rock.

* All slabs should have a minimum of 6" of gravel fill under it.
* In certain conditions you will have to bring in fill. Either to raise the level of dirt, or because of unstable dirt. This layer ( usually pitrun ) will have to be compacted and leveled. Do not be cheap with this; make sure you do a good job. Compacting equipment can be rented from a rental company. Just make sure that you get the proper size equipment for the job.

12. Foundation: Order the materials needed for the foundation from the lumber yard and the Forms from the Concrete company. When the materials arrive the framers can begin with the foundation.

* Do not try to save money by ordering all the building materials at this time. You will be the one that will have to move it when it gets in the way. Lumber yards will split the materials up into two or three (or as many as you like) packages.


13. Plumbing, Heating and Electrical: Contact Plumbing, Heating and Electrical trades so that they can install anything that is needed before the concrete is poured.

* Example: For Legal Suite the Electrician may have to lay a cable inside the concrete.
* Try not to get too frustrated when waiting for any of these people. Some of the block outs are for their convenience. If they don't want to do them at this time they can dig them out later (but would you want to be the one digging? Ha Ha). Things happen, be nice.

14. Footings Inspection: When the framers have finished laying the footing contact City Hall and request a Footings Inspection.

* Some framers will pour the concrete for the footings first and then the foundation, while others will prefer to pour the concrete for the footings and the foundations at the same time.

15. Concrete: If the footings are poured first the concrete truck will come twice, once to pour the footings and then again after the foundation has been built. Or if the foundation is built at the same time, the concrete can be poured for the footings and the foundation at the same time.

* When pouring ( usually done by the framing crew ) make sure that there are enough people to do the job, especially when the temperature is below freezing.
* Also, make sure that there is a vibrator on site.
* The concrete company will usually arrange for a pump trunk if needed.


16. Strip Foundation: Usually the day after the concrete has been poured the foundation can be stripped. The Concrete company should be called to pick up their forms.

* Try to place the stripped materials in a place where they are out of the way and will stay straight and clean.


17. Damp Proofing: Water proofing is required on the part of the foundation where the slab or skim coat is below grade level.

* Can be messy. Just lean against a sprayed wall.


18. Drain Tile: Drain Tile will have to be placed around the perimeter of your house whenever there is living space below grade level (ground level). This includes storage or crawl space.

* Rules concerning drainage depend on soil conditions, or type of house. In most slab on grade situations (where the concrete floor is above grade level) you may be able to eliminate drain tile. But it never hurts to install it.
* This work is usually done by yourself, with good wheel barrows, shovels and lots of friends.
* The top of the Drain Tile should be placed even with the footing/foundation joint.
* In some municipalities with storm sewers you will not be allowed to hook your down pipes into the perimeter drain. The same goes if you have a drain installed in a well window. You will have to put in a second line and drain it into a gravel pit.
* Make sure this job is done properly, it may just prevent you from getting a swimming pool in you basement.


19. Drain Tile Inspection: Inspector from City Hall.

20. Sewer & Water Hook-Ups: The plumber usually hooks up the sewer and water. When this is completed the Inspector from City Hall will be called for an inspection. Also, the local Water Company must inspect the water hook-up before it is covered.

* In case this wasn't done during the excavation..
* Note: the gas company will install their own hookups to the gas meter.

21. Backfilling & Grading: After the drain tile has been inspected the backfilling and grading can be done in most cases.

* Note: Again, although at times overlooked, a well prepared foundation for your house and drive way will be one of your best investments. As a builder you will be the one responsible for this. If you are not capable or willing to take this responsibility, hire an engineer or you may want to consider getting a General Contractor involved. Again it may cost a bit, I for one would not fool around with this part. In any case, use common sense and ask when in doubt.
* Use good material for inside the foundation, garage, driveway, and side walks. Do not skimp on the compacting of these areas.
* Steel will help with strengthening and keeping things in place. But due to settling, you will most likely end up with some cracks in your slab or garage floor with time. Most of the cracks can be fixed.

22. Slab or Skim Coat: Weather permitting your skim coat or slab could now be poured.

* Slab or Skim Coat: consists of layer of gravel, poly (which must be sealed against Radon Gas), and then a layer of concrete.
* A skim coat can be finished by yourself. But for a slab, hire a professional concrete finisher. Note: It is possible, with the exception of a tight crawl space, that the concrete work can be done after the framing is completed. The only difference being that you may get away with using a pump most of the time at this stage, not very likely at a later time.

[url=http://forum.fdccorporation.com/faq-s-most-recently-asked-questions-f3/steps-to-building-a-home-from-kelownabc-part-2-t3.htm#3]go to Part 2[/url]
Back to top Go down
View user profile http://fdccorporationforum.fdccorporation.comforumotionforum.fdc
 
Steps to building a home (from Kelownabc) Part 1
View previous topic View next topic Back to top 
Page 1 of 1
 Similar topics
-
» someone is building a rhino.....for real!
» Looking for Cities of Death Building Kits
» Building toward 1500
» charlie the unicorn PART 4
» Space Quest IV.5 Roger Wilco and The Voyage Home

Permissions in this forum:You cannot reply to topics in this forum
FDC & Associates Community Forum :: FDC Customer-Engineering Connection :: FAQ's (Most recently asked questions)-
Jump to: